Home » Articles posted by Frank Mullen
Author Archives: Frank Mullen
Natalie Wood Murder Mystery Revealed
When one of Hollywood’s most alluring actresses drowns after a night of drinking on her yacht, questions are sure to arise. Early on, Walken told investigators that he and Wood got into a wine-fueled argument. Keep reading the article below to learn more about Natalie Wood Murder.
In 2011, police reopened the investigation after Davern’s 2008 memoir revealed that he had heard the couple arguing before her death.
In November of 1981, Natalie Wood, who starred in such movies as West Side Story and Splendor in the Grass, disappeared off the coast of Catalina Island. She was found dead a few hours later in the water. Her death was classified as an accident, but a decade ago investigators reopened the case and called her husband at the time, actor Robert Wagner, a person of interest in her death.
Police cited contradictory statements from the captain of her yacht, Dennis Davern, and Wagner, as well as bruises that appeared on the body. In addition, her dinghy was found in a cove a mile from where she was last seen alive. The case remains unsolved, and the investigation into her death continues to this day.
Lt. John Corina of the Los Angeles County Sheriff’s Department said that more than 100 people have contacted detectives since the case was reopened, but no one has provided a big break. He also noted that there are still many questions in the case, including what happened on the night of her disappearance.
Corina says the discrepancies in the stories of the three men aboard her boat that night and the bruising on her body are red flags for investigators. He believes that what happened to the actress was not an accident.
In 2011, the sheriff’s office held a press conference about the case to ask for the public’s help in finding the answer to what happened to Natalie Wood. Investigators said they would be happy to speak to anyone who had information about the case. The event was a success, and the sheriff’s office hopes that more people will come forward with information about what happened to the star.
In the years since Natalie Wood’s death, there have been several rumors and theories that have emerged, most of them suggesting that she was murdered by someone that she knew or was in a relationship with. In the last few months, a former neighbor of Wood’s has revealed that she once ran from their home in fear for her life. The man who lived next door at the time said he heard her yelling that she was afraid of Wagner and he was going to kill her.
Christopher Walken
The death of Natalie Wood is one of Hollywood’s most mysterious and haunting cases. The circumstances surrounding her drowning remain murky and a subject of intense controversy, even decades after her tragic death. Many believe that her husband, Robert Wagner, was responsible for her murder. In the years leading up to her death, the couple had a volatile relationship. According to one witness, Wood was so afraid of Wagner that she fled their home and sought shelter with a neighbor. The mystery surrounding Wood’s death has led to the reopening of the investigation, and a host of new allegations have emerged about her last days.
The night of her death, Wood and Wagner were moored on a yacht off the coast of Catalina Island. They had been drinking ashore, and the boat’s skipper, Dennis Davern, heard them fighting. After they had finished their drinks, Walken left the boat to go back to her stateroom, and Wagner went after her. He said that he asked her to come back to him, but she refused. He then noticed that her dinghy was missing, and asked Davern to start looking for it.
In a book published in 2008, Wagner recounted the events of that night. He said that they argued and that he believed Walken was so angry that she took the dinghy to shore, where it was found later that morning in a cove about a mile from the yacht. He also wrote that he didn’t think she would have left the boat alone, given her fear of water, and because the dinghy was still attached to the yacht.
Wagner’s story has changed over the years, and he has not spoken to investigators about the incident. However, investigators have made multiple attempts to interview him.
Christopher Walken has appeared in countless films throughout his career, displaying a range of roles from dramatic to comedic. He has also appeared on Broadway, and received a Tony nomination for his performance in Martin McDonagh’s A Behanding in Spokane. In addition to acting, he has also performed as a musician and dancer.
Robert Wagner
In life, Natalie Wood was one of Hollywood’s most alluring actresses. Her movies were often classics that resonated with audiences. Her career had its ups and downs, though, and the latter years of her life were dark and depressing. Eventually, she died in a bizarre accident that many felt was suspicious.
In the months before her death, Wood was working on a sci-fi film called “Brainstorm.” She was married to Robert Wagner at the time. According to her sister, the pair had a troubled relationship. They fought and had several arguments, but they seemed to reconcile just before her death. The book also notes that Wagner treated Lana with outright hostility after her sister’s death. He would invite her daughter and mother to dinner and exclude her. He even ragged on her in the press after she sold some of Natalie’s clothes.
Investigators reopened the case in 2011, 30 years after Wood’s death. The move came after Davern’s 2009 book, “Goodbye Splendour,” claimed that he had heard the couple arguing on the night of her disappearance. A new coroner’s report also cited fresh bruises on the actress’s body, suggesting that she might have been assaulted before drowning.
Police have yet to comment on the book, but a detective from the sheriff’s department told Insider that Wagner, who is now 91, remains a person of interest in the case. The detective said that he has been trying to interview him for more than 10 years, but he refused to talk to investigators. Corina also claims that Wagner and Walken gave conflicting accounts of what happened on the yacht when Wood disappeared.
The book also states that Walken was a suspect in the murder, but the investigation was dropped because of a lack of evidence. Despite the rumors, Lana believes that Walken has nothing to do with the murder. She says that she did not write the book to bring down her brother-in-law, but that she wanted to help solve the mystery of her sister’s death. A rep for Walken did not respond to a request for comment.
Doug Bombard
During her time on the screen, Wood made hits such as Miracle on 34th Street, Rebel Without a Cause, West Side Story, and Bob & Carol & Ted & Alice. She was nominated for three Academy Awards before her 25th birthday and was a star in her own right.
In 1981, the actress went missing off the yacht she shared with her husband Robert Wagner. Hours later, her body was found floating in the ocean. Though original investigators thought she had fallen off the boat and drowned, recent studies have revealed a different truth.
The case has become a symbol of Hollywood’s darker side, with rumors that Wood was sexually assaulted by a man more than twice her age. The rumors have never been proven, but they have continued to resurface over the years.
Those who knew her best have been reluctant to talk about the incident, but some have opened up in recent years. Dennis Davern, the skipper of the yacht that night, told the LA Times that he didn’t tell police everything he could have because he was afraid to put Natalie and her family in danger.
After the initial investigation, a few years passed before anyone else was involved in the case. But when Lana Wood began to write books about her sister, she grew increasingly frustrated with the lack of information she was able to gather on her behalf.
At this point, she decided to take matters into her own hands. She filed a letter with the Los Angeles County Coroner requesting an inquest into Natalie’s death. This request was granted and an inquest jury convened in January 2002.
The film is based on interviews with Bombard and others who were close to her. Overlaid with historic photographs, Bombard’s recollections paint a picture of Avalon in its heyday. He remembers mornings and evenings spent fishing for white sea bass at Italian Gardens, Hollywood stars who became friends like John Wayne, and the island’s spring training days with the Chicago Cubs.
Plumbers and Sump Pumps
Plumber Clearwater FL installs, repairs, and maintains the pipes and fixtures that carry water and waste in residential and commercial settings. They often collaborate with construction teams and architects to ensure that plumbing systems integrate seamlessly into building projects.
They may also need to interpret blueprints and building codes and inspect plumbing equipment and structures. Plumbers frequently work evenings and weekends and are on-call for emergency situations.
A sump pump moves accumulated water away from your basement or crawl space, pushing it outdoors or into a drainage area when the water level rises. It’s a smart investment in your home, especially if your property has a history of flooding or if you live in an area prone to extreme weather conditions.
Sump pumps typically sit in a pit that’s located below the lowest part of your basement or crawl space. The pit is lined with a special liner, which helps prevent the liner from cracking or otherwise failing.
To start the sump installation process, locate the pump’s discharge pipe, which will run from the sump basin to a point outside your home. It’s important to keep in mind that the discharge line must be at least 10 feet (3.0 m) away from your foundation wall to prevent water from back-flowing into the house and creating further damage.
After finding the best location for the pump, dig a hole that’s large enough to accommodate your sump basin. Once the hole is excavated, add 2 to 3 inches of gravel to the bottom of the pit to support your sump pump and establish a sturdy base. Then, place a layer of filter fabric around the bottom of the basin to prevent silt and other debris from clogging the pit.
Once the filter fabric is in place, set your basin into the hole and backfill it with excavated dirt to secure it. Now it’s time to connect the plumbing and test your sump pump. To do this, slowly pour water into the basin until the float switch activates and turns on your pump. If it does turn on, drain the water and install a basin cover to keep debris out of the sump pit and reduce odors.
Lastly, a check valve should be installed to ensure that the discharge line only channels water out of (never back into) your home. This can be accomplished with a flexible discharge hose or with a span of PVC pipe that’s glued and well-secured at each end.
Sump Pump Maintenance
Once the sump pump is installed, it’s important to have it regularly inspected and cleaned. This will help to ensure that the unit is working properly, which can reduce your risk of costly repairs or replacement in the future.
The plumber will start by turning off the power to the sump pump. This is so that they can safely work on it without any risk of electric shock. They will also check to make sure that the float switch is set correctly so that it triggers operations when water in the basin reaches a certain level.
Next, the plumber will clean the pit and all of its components. This includes the battery, float switch, and inlet screen. They will also look for an oily residue inside the pump (which could indicate a defective seal). The plumber will verify that the backup power source is working and that the battery is charged.
Then the plumber will test the pump by pouring water into it to see if it starts and stops operation automatically. They will also check that the discharge pipe isn’t clogged with debris.
In addition to these tests, the plumber will examine the entire sump system for signs of damage or wear. They will take note of the location of the pump in the basin and the discharge pipe, and they will use a level to make sure that it is perfectly level both horizontally and vertically. They will also look for any areas that are leaking or cracked, as well as any corrosion on the pump’s parts.
Once the plumber is finished, they will reconnect everything and test the pump again. They will also look at the surrounding area to check for any mold growth or other issues that may need to be addressed. It’s a good idea to keep the pit covered when it’s not in use, which will help to prevent lint and sediment from entering the sump pump and pit. This will also help to keep the area dry and sanitary. If the pit has a cover, the plumber will remove it and replace it after the testing and cleaning is complete.
Sump Pump Repair
Unless you’re an experienced plumber, it’s best to let your local sump pump professional handle any necessary repairs or maintenance. For routine maintenance, they will first remove the pump from its basin and then remove the discharge pipe to check for obstructions. This will also give them a chance to inspect the pump for corrosion or other damage.
They will also check the inlet screen and the battery to make sure they are clean and in good working order. They may also lubricate the bearings to extend their life. Next, they will fill the basin with five gallons of water to ensure that the float switch works properly and to check the condition of the pump’s bearings. If you notice rust, it’s time to replace the pump.
If your sump pump turns on and off too often, it could indicate a problem with the float switch or a discharge line that is clogged. In addition, it could mean that the pump is undersized and that you need to upgrade to a larger model.
Other signs that your sump pump needs attention include a humming or banging sound, which can be caused by a damaged impeller or a jammed check valve. If the pump’s noise is accompanied by flooding or water leaking into your basement, it’s important to act quickly to prevent costly damage.
Your sump pump protects your home from expensive and destructive flood damage, but it’s vital to keep it functioning correctly by performing regular maintenance. A plumber can help you with this task, saving you money and reducing the risk of property damage. Contact Healthy Basement Systems to schedule a sump pump service today! We proudly serve Huntington, Smithtown, Bay Shore, Brentwood, Hempstead, Massapequa, and other Long Island communities. Request a quote online or call us to learn more about our services.
Sump Pump Replacement
A plumber can help you decide when it’s time to replace your old sump pump. They’ll consult on your home’s needs, considering factors like the size of your basement, the area’s average water table, and the frequency of heavy rainfall in your region. They’ll also advise on whether a combination sump pump or battery backup pump will work best for your home.
A common sign that it’s time to replace a sump pump is if the pump has an odor, rust, or is making loud noises when running. Odors could indicate that the impeller is cracked or that it has a blockage. Noise is usually an indication that the pump has a faulty check valve, which requires replacement.
Perpetual cycles indicate that the sump pump is unable to keep up with your basement’s water levels. It could also mean that the float switch is stuck in an “on” position, or it could be a result of other issues, like a broken underground pipe funneling water to the pump on a constant basis.
If you’re installing a new sump pump, the plumber will disconnect it from its power source and any discharge pipes or hoses. Then, they’ll remove the old sump pump from the pit and place the new pump in the pit, ensuring it is properly positioned and level. They’ll then connect the pump to its power source and any discharge piping or hoses.
The plumber may also install a new sump pit cover, which helps reduce the odor and noise of the pump, as well as keeping kids and pets out of the pump. They may also recommend adding a spring-loaded check valve to your sump pump, which can reduce the amount of gurgling noise that occurs as the water flows through the discharge pipe.
If you’re doing the installation yourself, make sure that the discharge pipe on your new sump pump is a match for your existing discharge pipe and that the arrow on the discharge pipe points up, which indicates that water flows up and out of the pit. Then, either screw on the new pipe or glue a male adapter onto one end of the pipe and then thread it into the hole on the sump pump.
Auto Body Dent Repair Methods
Boiling water is an inexpensive and quick solution to fix dents on plastic car bumpers. Remember that this technique can damage some paint jobs, so be careful.
Auto body repair technicians use several tools to remove dents and return cars to their original shape. They can apply glaze to the area, sand it, and then repaint the surface with a matching color.
Depending on the type of dent and your vehicle, there are several methods for auto body repair. These include pulling, tapping, pushing, and gluing. Each of these techniques has advantages and disadvantages. In addition, each of these methods requires specific tools to be effective. For example, pulling the dent requires a metal rod placed behind your car’s damaged area. The rod is inserted into the dent and then used to push the metal back into its original shape. This technique is especially useful for dents caused by hail damage.
Pulling the dent can create additional creases in the bodywork. This is because the dent pulls the sides of the bodywork in different directions. This may be a problem if you are trying to remove a large crease. This issue can be avoided by using multiple glue tabs or pulling in stages before and during the pulling of the center of the dent.
Another option is to use a plunger to remove a dent. This method can work well if the dent is small and is not on the design lines of the vehicle. However, this method can damage the paint if you are not careful.
You can also buy a dent-removal kit, which uses the same principle as the wooden dowel. These kits usually come with a bridge-type tool and various sizes of pulling attachments. To use this technique, you must clean the surface of the dent with alcohol to allow good adhesion. Once the glue has dried, you can use a slide hammer to pull the dent out of the car.
This method is useful if you have a small dent that cannot be removed with the other methods. It is also suitable for plastic parts of the car. Exercise caution when using this method because boiling water can burn you and damage your paint.
Some auto shops also offer a service to buff out minor dents. This service costs less than a full-body repair and can be very effective for some cars. You can find a reputable auto shop by checking online reviews. Moreover, you can contact the repair shop and ask about their prices and services.
A common method used for repairing dents is called tapping. It involves using a metal rod with a wooden knockdown to apply force on both sides of the dent. This makes the dent pop out and can be used for smaller dents. It is also less likely to damage the surrounding area than other methods. The problem with this method is that it takes a lot of time and can be expensive. The other downside is that it can chip the paint of the car.
Another way to remove dents is by pushing them from the back. This technique can be especially helpful in cases where the dent is caused by hail damage. This method can be tricky, but it effectively restores the metal’s original shape. Lastly, glue-pulling is another popular method using specialized glue to pull the dent.
This method is more advanced but can be very useful in some cases. First, you must test the glue on an inconspicuous part of the car to ensure it will not damage the paint. Then, you must drill two screws at the end of small wooden dowels to create handles that will be attached with hot glue to the bottom of the dent. It would be best to place the dowels in evenly spaced areas over the dent and then pull them. You must repeat this process over several spots in the dent.
Glue pulling can be especially effective for larger dents, providing multiple handles to pull on. It can also be more affordable than other repair methods and can be done on-site. However, you must have high-quality glue and lighting to complete the job.
Dry ice is another quick and inexpensive method for removing dents from your vehicle. The best part is that it requires no chemicals! You will need a bucket and a vacuum cleaner to use this method. To get started, pour boiling water over the damaged area of your car. This will make the plastic more flexible, making it easier to push out of place with a plunger. If the dent doesn’t come out completely, try dumping more boiling water on it.
A few techniques used in PDR (paintless dent repair) involve pushing or tapping. These are less advanced methods of pulling dents and can often be done at home without the cost of a professional technician. However, these methods may require much time and patience and might only sometimes be successful. If your car has a major dent, consider getting it repaired by a professional body shop instead.
A common trick involves using a hair dryer. This method works best for plastic bumpers and can be very effective. Place the hair dryer on the dent and heat it until the material has expanded enough to push back into its original shape. After a few minutes, spray the area with cold air to make the dent contract and pop out.
Another alternative is to use a tool designed specifically for the job. These tools usually come in various sizes and shapes to fit multiple dents. These kits are pricey but very effective at removing minor dents from your vehicle.
You can also try to remove a dent from your vehicle by soaking the surface with boiling water. This method is primarily used for small, plastic dents and only works if you can access the backside of the dent. This method is not recommended if you have painted surfaces on your vehicle, as the boiling water can damage the paint.
Some experts recommend a glue-pulling technique, which uses special tabs and hot glue to pull out dents. This is a more precise way to remove dents than taping or pushing, but it takes more skill to master. Using the correct tools and practicing on a clean vehicle is important. It would be best if you also rinse the area before beginning work. This will prevent the rusting of your vehicle’s surface.
Several types of glue can be used for pulling dents, but some are more effective than others. You can find many products at auto parts stores specifically made to remove dents. Glues can also be used to pull out sections of the car softly without damaging the rest of the bodywork.
Dents in a vehicle can cause long-term damage to the paint and body panel. This can reduce the value of a car and increase its repair costs. However, these damages can be prevented by contacting a professional auto body shop for an auto body repair. A professional will use the best tools and techniques to remove dents. They will also use special glue to ensure that the dents don’t return. This will prevent the need for expensive repairs in the future.
Depending on the size and location of the dent, a technician will determine whether it’s possible to repair it without removing the entire panel. This method is known as PDR (paintless dent repair). A technician will access the back of the damaged panel through a window opening or by removing trim pieces and inner panels. They will then massage the dent back into shape using specialized tools.
Some dents are too deep and large to be repaired by pushing them out. In this case, a technician may need to remove the entire panel. Using this technique, a technician can restore the original shape of a vehicle without losing its quality and appearance. This process is less costly than replacing the damaged panel and helps preserve resale value.
Another method for repairing a vehicle’s dings and dents involves using a bridge puller to lift the dent from below. This tool requires patience and is often used with other dent repair methods. To prepare for a bridge puller, you’ll need to apply the glue that comes with the kit to the deepest point of the dent. Next, you’ll need to attach the bridge puller head. After the glue is dry, you can remove the bridge puller.
In addition to repairing dents, an auto body shop can fix scratches and other minor imperfections on your vehicle’s paint job. While it is possible to perform a paint job at home, taking your vehicle to a certified dealer is generally easier and more affordable. In addition, a professional will have the right tools and experience to fix your vehicle’s dings and scuffs without damaging its finish.